The
MCOM are flanged or insertion type electromagnetic flow meters used for pipe 1/2” to above in wastewater, chemical, industrial water or municipal application. MICROMAG has no moving parts and has round headed self-cleaning type electrodes designed to discourage fouling, magmeter performs well and requires minimum maintenance in applications where debris or sand would impede propeller meters. There is no rotor to stop turning or bearings to wear out. Minimal straight pipe requirements allow MICROMAG meters to be used in piping configurations where there is little space between the meter and an elbow. Flow rate and total indications are standard on all models. Flow measurement units are customer-selected and factory set and can only be changed in the field by an authorized Modern Communication Technology.?
Pipe size |
DN10 to DN2000 (for higher sizes consult factory) |
|
Flanges |
Carbon Steel / SS 316 / SS 316L / SS 304 / ANSI / PN/DIN / BS / SMS / Tri-clamp. |
|
Pressure |
Up to DN 80: PN 40, DN 100 to DN 200: PN 16, DN 250 to DN 350: PN 10 |
|
Temperature |
PFA Liner |
0-200°C max, |
PTFE Liner |
0-150°C max, |
|
Rubber Liner |
0-90°C max, |
|
(Ambient Temperature Range 0-85°C). |
||
Accuracy |
±0.5% of reading [at ref. conditions] between 100% to 10% of calibrated range |
|
±0.7% of reading for flow rate between 10% to 5%[refer accuracy graph] |
||
Body
Materials |
Stainless steel / M.S. |
Liner |
Soft and Hard Rubber / PTFE / PFA/ Neoprene/Without Lining |
|
Electrode |
Hastelloy ‘C’ /S.S.316 |
|
Electronics Housing |
IP67 Die cast Aluminum/ Flame proof/IP 67/ IP 68 |
|
Power |
230VAC/110VAC, 50Hz/24VDC. |
|
Signal
output
|
4-20 mA dc isolated in max. 600 ohms. |
|
Frequency
output |
0-10KHz prop. To 100% Flow rate (open collector with10 mA /24Vdc max) |
|
Flow range |
0.3 0.3mtr/sec
to 12 mtr/sec |
|
Display Digits |
For Flow Rate |
For Total |
04 Digits |
09 Digits |
|
Units |
M3 /Hr |
M3 |
Liters/Minute |
Liters |
|
Liters/Second |
Liters |
|
Gallons/Minute |
Gallons x 1000 |
|
Flow |
Bi-directional Flow with separate
totalizers for forward and reverse flow |