- About Us
- Products
- Services & Automations
- Gallery
- Career
- Contact Us
Danger: This Equipment
Must Be Installed And Serviced
Only By Qualified Electrical Personal.
Ensure All Power Supply For This Equipment
Must Be Turn “OFF” Before Working On Or Inside The Equipment. Always Use A Properly Rated
Voltage Sensing Device
To Confirm That Power Is “OFF”. Replace
All Devices, Doors,
And Covers Before
Turning “ON” Power
To This Equipment. Maintain Electrical Clearances Between Cables And Live Parts.
Use: Suitable For Use In An Industrial Environment When
Installed In Accordance With Applicable Standards.
Storage: In
A Dry,
Dust-Free Environment Protected From
Corrosion. Failure To Follow These
Instructions Will Result In
Death Or Serious Injury.
LED Indications And SMS Alerts:-
Led Indications:-
For All Faults And For Indicating Tank Full / Empty, There
Are Led On MCOM Intelligent Controller. The Other
Led That Are Present On Intelligent Controller Are Of Phase Voltages
Led, Pump LED, 4G Network
LED, GSM Communication LED, Status LED, Timer LED, GPRS
LED And SERVER
LED. Detailed Description Is In The Table As Below.
SMS Alerts:-
All Registered Users Will Receive Alert SMS In Case Of Current Faults (Current SPP, Current Unbalance, Locked Rotor, Dry Run
Overload). For All Voltage Faults, All Registered Users Will Receive Alert SMS (Voltage SPP, Phase Reversal, Voltage Unbalance, Under Voltage, Over Voltage). Master Will Receive
All Fault Clear SMS. All Registered Users Will Receive
Alert SMS After Upper Tank Gets Full Or Lower Tank Gets Empty. In Case Of Pump, Panel Theft Or Pump Wire Disconnection, Master Will Receive Emergency Alert SMS. Detailed Description Is In The Table
As Below.
Product Specifications:-
|
Parameters |
Specifications |
Details |
|
Rated Voltage |
415 V ; + 10% - 15% |
Pump On In Manual
Mode |
|
Rated Insulation Voltage |
660 V (Minimum) |
Used To Set Pump Current In Device
At Power On Of Device In Manual Mode |
|
Rated Impulse Withstand Voltage |
4 kV |
Pump Off – Reset
All Fault |
