Shop Details

Features

·         built-in 32-bit ARM Micro controller

·         built-in Watchdog

·         built-inwater level controller

·          Current Range / HP: 3 – 99 Amps/1-80 Hp

·         built-in seven segment display: Digital Voltmeter 180 – 520 V and Digital Ammeter 3 – 99 Amp, GSM Network availability in Percentage.

·         Push button for Auto and Manual selection

·         Three Mode operations: -Auto (online),WLCD (overhead tanks level demand), Manual (local) 

Manual Mode: - Users can operate pump through local ON/OFF push button with Protections.

WLCD Mode: -Here is a simple, automatic water-level controller for overhead tanks that switches on/off the pump motor when water in the tank goes below/above the minimum/maximum level. The water level is sensed by two floats to operate the switches for controlling the pump motor.

Auto Mode:Users can operate pump through Mobile (SMS/Call/Web and Mobile App)

·         Start / Stop / Monitor / Set your motor from any phone

·         Real time IoT based data monitoring web and mobile app for pump status.

·         Talks Online in Local Language

·         Four Authorized users can be added

·         SMS and online Realtime reports

·         Online Parameter Settings by SMS and web /mobile App.

·         Call Auto Lift and Auto Cut

·         Hour Meter, Total Hour

·         MeterSite Settable Four Digit Password with SIM Tracking

·         Missed Call/SMSand web & Mobile app based ON / OFF pump operation. 

·         Web Based Android Application

·         Receive Phone Call for Fault & Power Return (Call Back)

·         Select Auto / Manual Mode by SMS, Web & Mobile app.

·         Real timeVerbal Voltage & Current Information on web and Mobile APP.

·         Multi Location with Fault and SMS Log in web /Android App.

·         IOT Based Web Data Logging on Server

 Protections:

·         Phase Failure (Supply Side)

·         Phase Failure (Motor Side)

·         Reverse Phase (Supply Side)

·         Voltage and Current Unbalance

·         Electronic Overload (Site Settable)

·         Remote Sensing Dryrun (Site Settable)

·         High / Low Voltage (Site Settable)

·         Extreme High Current (Fixed at 50Amps.)

 Timers: 

·         Power ON Timer for Auto Start (Site Settable)

·         Star Delta Timer (Site Settable)

·         Dry run Auto Start Timer OFF – 5 – 720 mins. (Site Settable)

·         Clock Based 4 ON & 4 OFF Timers (MTC)

·         Motor OFF Timer OFF – 5 – 720 mins. (Site Settable)

·         Repeat Run Timer OFF – 5 – 999 mins. (Site Settable)

·         Time Compensation Enable / Disable Facility

Specifications

1.      System Settings

• Input Voltage (AC)    : 250 – 470 VAC, 50 Hz

• On voltage (Cold Start): 250 VAC

• Auto Off voltage: 200 VAC

2. Protections / Setting Parameters

Pump Current Range    : 3 – 99 Amp

2. Protections / Setting Parameters

 3.TimersSetting

4. Monitoring Display

• Digital Voltmeter     : 180 – 520 V

• Digital Ammeter       : 3 – 99 Amp

5.Monitoring Web and Mobile app:

·         Real time monitoring for all parameters.

6. Reset

• Resetting mode        : Manual by OFF switch, SMS, WEB, Mobile app.

7. Output Relay Contact

• Relay Mechanical life           : 10 lac operations

• Dielectric Strength   : 2.2 KV , 50 Hz for 1 min

8. Enclosure & Mounting

• Enclosure Material    : MS powder coated Enclosure

• Mounting      : Wall Mounting with 4 screw M4 × 15 mm

• Temperature  : 5 to 60°C

• Humidity      : Up to 90% RH

9. Dimensions & Weight

• L × W × D (mm)      : 250 x 160 x 74mm

• Power Consumption : Less than 4 Watts

• Weights        : 990 gms.

Applications

Industrial

Agriculture

Irrigation

Domestic

Connection Diagram