MCOM400G is a rugged cellular MODEM offering state-of-the-art mobile connectivity for machine to machine (M2M) applications. It works in intelligent mode. This device is suitable for data monitoring from remote device. The device is suitable for level monitoring like gas and water level. It supports two analog input, one RS485/232, any MODBUS communication via serial port which works as Master. The minimum data rate from remote to central server is 20 sec.
·
Supports
all types of 4G SIM cards.
·
The
data transmission mode is 4G/3G/2G.
·
Supports
all types of M2M SIMs.
·
Dual
SIM redundancy
·
Supports
quad band auto switchable.
·
Small
antennae included with the device. High gain antennae optional, in case of low
connectivity.
·
Two
Serial Ports for RS232 and RS485 for external device interface.
·
Three
digital inputs, two digital outputs, two analog input and two pulse input.
·
One
LAN Port for external device interface.
·
10BaseT/100BaseTX
Ethernet PHY embedded
·
Five
LED indicators provide status for power, server connection, GPRS connection,
SIM registration or network, 4G connectivity.
·
Phase
AC input supply, worked within power supply range of 50 to 240V AC, 50 Hz.
·
Operating
temperature: -25 to 85 °C.
·
The
metal enclosure can be mounted on a DIN-rail or on the wall.
·
Data
acquisition on standard protocols, like MODBUS TCP/RTU.
·
Internal
data storage: 16MB.
·
Supports
protocols like TCP/IP/ HTTP/FTP/MQTT for data communication to the server.
·
Auto
reboot during a pre-set time of a day.
·
Industrial
class design suitable for long time work applications.
·
Facility
to store mobile numbers for authorization of remote configuration.
·
Configuration
of device parameters via serial port or remotely by SMS.
·
Communication
of data to server on specific events or on configured intervals
·
Storing
and forwarding of data in case of communication failures.
·
Standards:
GSM/GPRS/EDGE/UMTS/HSPA/FDD LTE
·
GPRS/EDGE:
850/900/1800/1900 MHz
·
HSUPA:
900/2100 or 850/1900 MHz optional, DL/UL 7.2/5.76 Mbps, fallback to 2G.
·
HSPA+:
850/900/1900/2100 or 900/2100 or 850/1900 MHz optional, DL/UL 14.4/5.76 Mbps,
fallback to 2G, FDD LTE: 800/900/1800/2100/2600 MHz or 700MHz (B17 or B13)
optional, DL/UL 100/50 Mbps, fallback to 3G/2G.
·
SIM:
1 x (3V & 1.8V)
·
Antenna
Interface: SMA Female, 50 ohms impedance.32-bit high performance
microcontroller MCU
·
32-bit
high performance microcontroller MCU
·
Remote Pump data monitoring and
controlling
·
Energy Monitoring, e.g.
Electricity, Solar, Wind, etc.
·
Water Metering/Flow Meter
·
Distribution Automation
·
Automatic Meter Reading
·
Industrial Automation